Aqua-Pure AP110 Whole House Water Filter Cartridge. Dirt, Rust and Sediment Cartridges.
The Omnipure 10" OMB934 1M (replaces OMB934 Carbon Block Cartridges are extremely effective at removing unwanted tastes, odours, chemicals Heavy Metals, Lead and other substances.
Omnipure carbon blocks use fine premium coconut carbon to provide better tasting water.
AQUA-PURE AP110 FILTER 56204-06 ( 2-5/8 x 9-3/4 ) Features
The Aqua Pure AP110 provides three times the life of comparable cartridges. This high quality commercial duty cartridge is a progressive porosity polypropylene melt blown construction preventing unloading or passing. The graded density design and grooved surface increases dirt holding efficiency and capacity, providing up to three times the life of comparable cartridges. The AP110 reduces turbidity, algae, sediment, dirt, rust, and particulate contaminants down to 5 microns in size.
Grooved cartridge increases surface area for longer filter life
Extended cartridge life
Rigid construction help to eliminate sediment "unloading" due to variances in water pressure
Cartridge is manufactured from FDA CFR-21 compliant materials
Maximum operating temperature of 170° F (76.7°C)
3M Aqua-Pure AP110 Filter, Alternate Part Numbers
3M Part Number: 70020162759 & 70020162775
Omnipure OMB934 1MPB is suitable for
Water Heaters and Coolers
Residential and Commercial Water Filter Systems
Pre and Post Reverse Osmosis Filtration
Food Service Industry
3M AQUA-PURE AP110
OMNIPURE OMB934 1MPB
Flow Rate : 1.9 lpm
Operating Temperature : min 0.6°C / max 38°C
Operating Pressure : min 207 kPa (30 psi) / max 827 kPa (120 psi)
Technology : High quality Carbon Block
Function : Chemical and Mechanical Reduction
Capacity : 1,575 litres
most competitors systems that require 2.5" x 9.75" cartridges
Cuno part # 56204-04
Alternative Part #: AP110
Grainger Part #: 1P753
Service Life : 6 months
Chlorine, Taste and Odor Reduction
Heavy Metal Reduction
Minimal Release of Carbon Fines
1 Micron Filtration
Cyst Reduction - Cryptosporidium & Giardia
Size: 10" Standard
Made in USA by Omnipure
Micron Rating : 99% @ 1 _m
Filter Dimensions : 2.50@ O.D. x 1.25@ I.D. x 9.80@ L
Lead at pH 6.5/ Lead at pH 8.5/ Lindane/ Mercury at pH 6.5/ Mercury at pH 8.5
Particulates (Class I)
Chemical and Mechanical ReductionTested and Certified by NSF International against NSF/ANSI Standards 42 for the reduction of Chlorine Taste and Odour. Toxaphene
Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily in your water.
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia!
If you are not 100% satisfied with your purchase we offer a full refund or replacement.