Aquapure AP212 Whole House Compatible Premium Filter Set Aqua Pure Compatible AP212 Wholehouse Filters AP110 & AP115
FEATURES & BENEFITS
Undersink Big Blue 20"x2.5" Whole House Carbon Block Filter
20"x2.5" CTO Carbon Block Filter 5M
5μm, Coconut Shell Activated Carbon Block Filter.
Chlorine, taste and odor reduction.
No release of carbon fines
Material conforms FDA grade.
*Cautions: Flushing for 5 minutes prior to use. *Warning: For water use only
*Pressure drop will be determined based on feed water pressure, filter cartridge selection and port sizes, fluid viscosity, filter life and conditions.
This Filter can be replace 3M aqua pure AP212 OR AP11S
10" 1 Micron Polypropylene Sediment Filter Cartridge General-purpose spun polypropylene sediment filter cartridge. Fits in most standard 10" drop-in filter housing systems. Used in residential, commercial, and food-service applications as a sediment filter or pre-filter.
10 x 2.5 Sediment replacement filter 1 micron x1 Suits all standard 10 inch housings Premium filtration poly spun Suitable for countertop or undersink water filter models
10" 1 Micron Sediment Filter
Manufactured from 100% pure polypropylene fibers
Filters out larger dirt and rust particles
High dirt-holding capacity and superior sediment filtration
Excellent bacteria and chemical resistance
Extends the life of primary filter cartridges
100% Polypropylene material for wide chemical compact
True multi-layered depth filtration
* Pressure drop will be determined based on feed water pressure, filter cartridge selection and port sizes, fluid viscosity, filter life and conditions.
SPECIFICATIONS
20"x2.5" CTO Carbon Block Filter 5M
5μm, Coconut Shell Activated Carbon Block Filter.
Chlorine, taste and odor reduction.
No release of carbon fines
Material conforms FDA grade.
Max. Flow: 0.75 gpm
Max. Pressure: 120 psi
Max. Temperature: 104°F
Suggested Life: 3500 gal
10"x2.5" Sediment Replacement Filter 1M
Filter Media: Polypropylene
Temperature Rating: 40°F – 175°F (4.4°C – 79.4°C)
Initial Pressure Drop: <1psi typical
Flow Rate: 8 gpm typical
REDUCES
Filter to effectively reduce the sediment, chlorine, taste & odours.
Lead at pH 6.5/ Lead at pH 8.5/ Lindane/ Mercury at pH 6.5/ Mercury at pH 8.5
Particulates (Class I)
Toxaphene
Chemical and Mechanical ReductionTested and Certified by NSF International against NSF/ANSI Standards 42 for the reduction of Chlorine Taste and Odour.
Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily in your water.
GUARANTEE
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia!
If you are not 100% satisfied with your purchase we offer a full refund or replacement.