Chemical & Mechanical Water Filter Reduces: Sediment, Chlorine, Limescale, Taste & Odour
Filter Replacement Instructions 1. Shut off the water supply 2. Grasp existing filter and remove by rotating left until it stops and pull down releasing it from the filter head 3. Align replacement filter guide channels with the corresponding posts of the filter head 4. Insert the filter upward until it fully seats into the head, then rotate right until it stops 5. FLUSH 10 litre of water through the filer before use
Caution: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system. Replacement: The filter cartridge must be replaced every 12 months, at the rated capacity, or sooner if a noticeable reduction in flow rate occurs.