IC8 REMOTE/UNDERSINK CHILLER REMOTE/UNDERSINK CHILLER with Lab Pua Filter KIT

New product

Water chiller with filter Kit  Australia leading brand  Water mark approved product 

More details

Each: $899 tax incl.

More info

IC8 REMOTE/UNDERSINK CHILLER REMOTE/UNDERSINK CHILLER

With its 8 litre per hour cooling capacity, the Waterworks™ IC8 is proof that good things come in small packages. Due to the compact design, energy efficiency and quiet operation the IC8 Under-sink chiller is the obvious choice for household applications and offices alike.

SPECIFICATIONS CABINET: The cabinet is a corrosion resistant, high polymer polyester coated steel panel. COLD WATER TANK: 1.7 litre fully insulated, 304 stainless steel tank. The drain plug and seal are removable for servicing.

REFRIGERATION SYSTEM: This fan assisted, static condenser system utilises R134a refrigerant which is non toxic, non-flammable and non ozone depleting. Refrigerant flow is controlled by capillary tube, which has no moving parts. The compressor is protected by an automatic overload, is lifetime lubricated and hermetically sealed.

INSTALLATION GENERAL: The Waterworks™ lC8 can be installed in small spaces with adequate ventilation, and can be used in conjunction with most inline filter systems. The IC8 must be professionally installed with either a vented tap or with the included kit which contains a pressure reducing valve (PRV), pressure limiting valve (PLV), shutoff valve, stainless steel connectors and a drain clamp.

PLUMBING CONNECTIONS:
Both the inlet and outlet are recessed ¼” stainless steel pipes.
Quick connect stainless steel fittings are included in the above mentioned installation kit.


ELECTRICAL: Certificate number 202240. 220-240v 50hz single phase.
Full load current is .8 amps. 1.5 metre power cord is supplied

INSTALLATION To be installed in accordance with local plumbing laws. Failure to install a certified Pressure Limiting Valve will void warranty.

COOLING PERFORMANCE: 8 litres per hour at 8-10°C Cooling Speed: From 27°C to 8°C in 20 minutes Draw Off Capacity: 8 cups (150ml) below 10°C


WARRANTY The Waterworks™ IC8 under sink chiller is covered by a 3 year comprehensive warranty (copy available on request). The warranty provides comprehensive parts and labour coverage for the period of 3 years from the date of original sale.

LAB PUA RESIDENTIAL WATER FILTER   LPA-CS5-10

***SCALE INHIBITOR 

• This filter  Service Flow rate of 5.67 Liters Per minute
• Rated  Capacity 13,210 gallons ( 50, 000 liters )
• Operation Temperature 4~38C ( 39~100F)
• Dimension  3.7"*(9.4cm) 18.8"  (44cm) overall  
• Cartridge 3.3" * 10"
• Weight 0.85 KG
• Claim Chlorine, Taste and  Odor Particulate,
   Bacteria & Cyst  Lead removal. 

*LPA-CS5-10 (5um carbon block & Scale inhibitor, 10"L)

Service Flow Rate

1.5GPM (5.67L/min)

Rated Capacity

13,210 Gallon (50,000L)

Operation Temperature

4~38℃ (39~100℉)

Pressure Requirements

10~100 psi (0.7~6.9bar)

Inlet / Outlet Connection

3/8"

Electrical Connection

None required

Dimension

Overall : 3.7"*12.5"

Cartridge : Ø3.3"*10.7"

Weight

1.1kg

Claim

Chlorine, Taste and Odor,

Particulate, Scale Inhibitor

• Phosphate can prevent to make scale in boiler or heater (phosphate)

• 5micron pore size CTO Block

• Extrusion carbon production method provides stable quality and

• Pre-shield Technology can prevent early clogging and keep the lifespan.

• Replacement method is easy quick-change.

LAB PUA Carbon Block Filter(CS5 Series)

LAB PUA MODEL SPEC CHART

Lab Pua Spec

Reviews

Path: > > > IC8 REMOTE/UNDERSINK CHILLER REMOTE/UNDERSINK CHILLER with Lab Pua Filter KIT

USER GUIDE