10"X4.5" Polyspun Polypropylene Sediment Cartridge - 5 Mic Water Filter
General-purpose spun polypropylene sediment filter cartridge. Fits in most standard 10" drop-in filter housing systems. Used in residential, commercial, and food-service applications as a sediment filter or pre-filter. 10 x 4.5 Sediment replacement filter 5 micron x1 Suits all standard 10 inch housings Premium filtration poly spun Suitable for countertop or undersink water filter models.
Features & Benefits • The filter is 3-layer density type. The service life is 30% higher than the general sediment filter. Accurate micron rate control. The outer layer is 10 micron; the inner layer is 5 micron; the middle layer is 7 micron. 5 micron Particle removal rate is over 95% • 100% Fresh Polypropylene.BPA Free • Manufacturered by fully automatic production line.Accurate and absolute micron rate control.
Applications • Food and beverages • Oil and gas • Electronics • Reverse Osmosis Pre filtration • Fine chemicals • Metal finishing • Pulp and paper
Specifications • Model Number: AB-PP1045 • Micron Rating: 5 Micron • Min/Max Flow: 0 - 154 Lpm • Min/Max Temperature: 0-52°C • Min/Max Pressure: 100 - 800 kPa • Size: Standard 4.5” x 10” • Filtration Life: 6 Months *Depends on water quality and level of contaminants. Directions: Flush after installation for 5 minutes. For best results, change cartridge at 6 monthly intervals. Caution: Do not use with microbiologically unsafe water without adequate disinfection. Warning: For correct operation of this, it is essential to observe manufacturers instructions.
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia!
If you are not 100% satisfied with your purchase we offer a full refund or replacement.