350kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port

FMBP 350

New product

FMBP 350 350kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port

More details

$62 tax incl.

More info

350kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port

The APEX FiltaMate FMBP350 Pressure Limiting Valve is ideal for use on drinking water equipment

and filtration systems.

APEX FiltaMate FMBP350 Brass/Plastic Pressure Limiting Valves reduce water pressure to 350kPa, providing protection from pressure spikes for water appliances and filter systems.

15mm (1/2" BSP) Inlet with 1/4" Quick-Connect for tubing.

FM & FM 1/2 are precision machined from high quality NZ brass. FM valve is nickel plated.
Integral dual check valves help prevent backflow (Not included all models - see specifications and product codes below).
Integral line strainer protects device and eliminates need for additional strainer to be fitted upstream. (Not included all models - see specifications and product codes below).
FiltaMate resists water hammer and limits water pressure to filters thus avoiding costly water damage.

Standards :

  • Complies with NZ Building Code G12 (2001)

  • Complies with NZS 4608:1992

  • Australian Watermark Approval AS1357.2 Lic. 02596

  • Australian Watermark Approval AS2845.1 Lic. 21876 (FM, FM 1/2 only)

Installation_des.png

  • Installation must be carried out by a Qualified Plumber

  • All pipe work must be flushed prior to installation

  • Do NOT apply heat near valve during installation

  • Must be fitted downstream of approved isolating valve

  • Must be installed in the direction as indicated by the flow arrow

  • Must be protected by a line strainer - See Specifications tab

  • Must be installed according to local regulations

  • May be fitted in any orientation

  • Warranty is limited to any fault found in a valve due to poor workmanship or materials that is returned to Apex Valves Ltd within 2 years from the date of manufacture

  • If thermal expansion (due to heating or cooling) or back pressure can occur downstream, an expansion valve must be fitted to relieve the excess pressure build up

  • Inlet: 15mm, 1/2" BSP (female)

  • Outlet: 1/4" John Guest connector

  • Length: 98mm

  • Flow Rate: 14 L/min at 700 kPa [100psi] inlet pressure

  • Check Valve: 10:1 (for every 10 kPa [1.5psi] increase in inlet pressure above 1000 kPa [150psi], the outlet pressure will increase by 1 kPa [0.145psi]).

  • Outlet Pressures: 600 kPa +/- 10% @ 1000 kPa [150psi] inlet pressure

  • Max inlet pressure: 1600 kPa [230psi]

  • Max temperature: 40°C [105°F]

  • Min temperature: 1°C

GUARANTEE

BEST PRICE GUARANTEE

WE AIM TO PROVIDE YOU WITH THE BEST PRICE AVAILABLE IN AUSTRALIA!

IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.

MORE INQUIRY?

Path: > > > 350kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port

Related Products