350kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port
The APEX FiltaMate FMBP350 Pressure Limiting Valve is ideal for use on drinking water equipment
and filtration systems.
APEX FiltaMate FMBP350 Brass/Plastic Pressure Limiting Valves reduce water pressure to 350kPa, providing protection from pressure spikes for water appliances and filter systems.
15mm (1/2" BSP) Inlet with 1/4" Quick-Connect for tubing.
FM & FM 1/2 are precision machined from high quality NZ brass. FM valve is nickel plated. Integral dual check valves help prevent backflow (Not included all models - see specifications and product codes below). Integral line strainer protects device and eliminates need for additional strainer to be fitted upstream. (Not included all models - see specifications and product codes below). FiltaMate resists water hammer and limits water pressure to filters thus avoiding costly water damage.
Complies with NZ Building Code G12 (2001)
Complies with NZS 4608:1992
Australian Watermark Approval AS1357.2 Lic. 02596
Australian Watermark Approval AS2845.1 Lic. 21876 (FM, FM 1/2 only)
Installation must be carried out by a Qualified Plumber
All pipe work must be flushed prior to installation
Do NOT apply heat near valve during installation
Must be fitted downstream of approved isolating valve
Must be installed in the direction as indicated by the flow arrow
Must be protected by a line strainer - See Specifications tab
Must be installed according to local regulations
May be fitted in any orientation
Warranty is limited to any fault found in a valve due to poor workmanship or materials that is returned to Apex Valves Ltd within 2 years from the date of manufacture
If thermal expansion (due to heating or cooling) or back pressure can occur downstream, an expansion valve must be fitted to relieve the excess pressure build up
Inlet: 15mm, 1/2" BSP (female)
Outlet: 1/4" John Guest connector
Flow Rate: 14 L/min at 700 kPa [100psi] inlet pressure
Check Valve: 10:1 (for every 10 kPa [1.5psi] increase in inlet pressure above 1000 kPa [150psi], the outlet pressure will increase by 1 kPa [0.145psi]).