AQUA PURE PLUS
  • FREE SHIPPING ON ALL ITEMS!  AUSTRALIA WIDE!

600kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port( FILTAMATE APEX)

FMBP600

New product

600kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port( FILTAMATE APEX)

More details

$62 tax incl.

More info

FMBP600 kPa Filtamate®- Pressure Limiting Valve

600kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port (FILTAMATE APEX)

High pressure systems to protect downstream components, e.g. Water filters, drink dispensers, ice makers, coffee machines and reverse osmosis machines.
Reduces pressure to 600 Kpa
Mobile homes and caravans where a connection is available to mains water.

FM & FM 1/2 are precision machined from high quality NZ brass. FM valve is nickel plated.
Integral dual check valves help prevent backflow (Not included all models - see specifications and product codes below).
Integral line strainer protects device and eliminates need for additional strainer to be fitted upstream. (Not included all models - see specifications and product codes below).
FiltaMate resists water hammer and limits water pressure to filters thus avoiding costly water damage.

Standards :

  • Complies with NZ Building Code G12 (2001)

  • Complies with NZS 4608:1992

  • Australian Watermark Approval AS1357.2 Lic. 02596

  • Australian Watermark Approval AS2845.1 Lic. 21876 (FM, FM 1/2 only)

Installation_des.png

  • Installation must be carried out by a Qualified Plumber

  • All pipe work must be flushed prior to installation

  • Do NOT apply heat near valve during installation

  • Must be fitted downstream of approved isolating valve

  • Must be installed in the direction as indicated by the flow arrow

  • Must be protected by a line strainer - See Specifications tab

  • Must be installed according to local regulations

  • May be fitted in any orientation

  • Warranty is limited to any fault found in a valve due to poor workmanship or materials that is returned to Apex Valves Ltd within 2 years from the date of manufacture

  • If thermal expansion (due to heating or cooling) or back pressure can occur downstream, an expansion valve must be fitted to relieve the excess pressure build up

  • Inlet: 15mm, 1/2" BSP (female)

  • Outlet: 1/4" John Guest connector

  • Length: 98mm

  • Flow Rate: 14 L/min at 700 kPa [100psi] inlet pressure

  • Check Valve: 10:1 (for every 10 kPa [1.5psi] increase in inlet pressure above 1000 kPa [150psi], the outlet pressure will increase by 1 kPa [0.145psi]).

  • Outlet Pressures: 600 kPa +/- 10% @ 1000 kPa [150psi] inlet pressure

  • Max inlet pressure: 1600 kPa [230psi]

  • Max temperature: 40°C [105°F]

  • Min temperature: 1°C

GUARANTEE

BEST PRICE GUARANTEE

WE AIM TO PROVIDE YOU WITH THE BEST PRICE AVAILABLE IN AUSTRALIA!

IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.

MORE INQUIRY?

Path: > > > 600kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port( FILTAMATE APEX)

Related Products