14 L/min [4 USgpm] at 700 kPa [100psi] inlet pressure
10:1 (for every 10 kPa [1.5psi] increase in inlet pressure above 1000 kPa [150psi], the outlet pressure will increase by 1 kPa [0.145psi]).
350 and 600 kPa [50, 60 and 85psi] +/- 10% @ 1000 kPa [150psi] inlet pressure (Contact Apex Valves for additional pressures available).
Maximum inlet pressure:
1600 kPa [230psi]
40˚C [105˚F]; 60˚C [140˚] for FM and FM 1/2.
FMP supplied with fixing clip and screw.
FM DR (Dezincification Resistant) brass.
FMP Acetyl plastic.
FMBP DR brass inlet, acetyl plastic outlet
Installation must be carried out by a Qualified Person.
All pipe work must be flushed prior to installation.
Do NOT apply heat near valve during installation.
Must be fitted downstream of approved isolating valves.
Must be installed in the direction as indicated by the flow arrow.
Must be protected by a line strainer (See specifications and product codes for valves with integral line strainer).
Must be installed according to local regulations.
May be fitted in any orientation.
Warranty is limited to any fault found in a valve due to poor workmanship or materials that is returned to Apex Valves Ltd within 1 year from the date of manufacture.
If thermal expansion (due to heating, cooling) or back pressure can occur downstream, an expansion valve must be fitted to relieve the excessive pressure build up.
The FiltaMate valve opens and closes automatically every time water is drawn through it. As it is a mechanical device we recommend that it is replaced every 5 years or sooner in high usage installations.
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia!
If you are not 100% satisfied with your purchase we offer a full refund or replacement.