AQUA BLUE H20 AB-5100 removes more than just chlorine taste and odor from drinking water. Each of the five stages of water filtration performs a unique purification function, delivering pure, safe drinking water for the entire family. This powerful reverse osmosis system starts the purification process by removing tiny particles like rust, sediment and insect parts. This protects your family and prevents the filtration systems from clogging. Next, the water flows through two activated carbon block cartridges. These compressed carbon block filters remove taste and odor-causing chemicals like chlorine, chloramine and rotten-egg odors. But thats not all. Did you know that the chlorine disinfection process can create cancer-causing byproducts in the water? The good news is these carcinogens, called THMs, are removed by carbon filters. The carbon cartridges also remove organic contaminants like herbicides, insecticides and industrial chemicals that seep into groundwater.
The next step involves the reverse osmosis (RO) process. Here water is squeezed through a special membrane. Heavy metals, like lead and mercury, are removed while purified water passes through. The RO process also removes salts, fluoride, radon and benzene. The purified then flows through a post-filter containing granular activated carbon. This acts as a polishing filter, removing any traces of tastes, odors and gasses, for crystal clear, sparkling drinking water.
The AB-5100 Reverse Osmosis
also includes a water storage tank and designer faucet. As the filtration system makes purified water, it fills the storage tank (up to 100 gallons per day). The storage tank sends purified water to the designer faucet. Your regular sink faucet will provide unfiltered water for washing dishes. The designer faucet provides only purified water for drinking, cooking, and washing vegetables.
The filtration system is pre-assembled and can be installed with simple hand tools. We recommend installation by a licensed plumber to insure adherence to all local codes. Routine replacement of the filter cartridges is recommended to maintain filter performance. Replacement cartridges are available from AQUA BLUE H20 Water Filters.
Filter Stages
Figure 1.1 Contaminant Removal from Filter Stage
Specifications
- A Water supply adapter valve
- BCold water shut-off valve
- CAuxiliary faucet
- DGarbage disposal
- EPre-carbon filter sumps
- FDrain Saddle
- GStorage tank with valve in open Position
- HPre-filter sump
- IMembrane assembly
- JPost-filter
WHABB203 / STAINLESS STEEL FREE STANDING
20" Big Blue Triple Housing with Stand PP Sediment supported NANO-ZINC,( INHIBIT BACTERIA) Activated Carbon Block Filters
Easy to install.
• Large capacity for carbon cartridge.
• Removes sediment.
• TRIPLE Stage which means longer cartridge life.
• Excellent chlorine, taste & odour reduction reduction.
• Peace of mind with whole house filtration.
• No moving parts.
• No chemicals.
• Low maintenance.
• Protects and prolongs life of appliances.
• No power required.
20" Big Blue Whole House Water Filtration System - this water treatment system treats all of the water entering your home, removing sand, silt, sediment, rust, and other particles that can damage your water softener, prematurely foul carbon filters or ruin the plumbing fixtures and valves. This Dual Water System effectively eliminates many impurities from tap water to offer sparkling clean and great tasting water throughout your whole house.
WATER FLOW 70 LITERS PER MINUTE SUIT FOR ALL WHOLE HOUSE SUITABLE FOR ANY FLOW 0-100LPM
Kit includes
1X (20"-4.5") Big Blue Triple Water Filter Housing
3X Gauge
1X (20"-4.5") PP Sediment supported with NANO-ZINC HIGH FLOW
1X (20"-4.5") CTO HIGH FLOW
1X (20"-4.5") PP Sediment HIGH FLOW
1X Metal Bracket Heavy Duty
2X (1" To -3/4") Bushing
1X Housing Wrench
1X Extra O ring for the future replacement
1X Teflon Tape
20" x 4.5" Triple Big Blue Whole House Water Filter System Complete with Hard Water Conditioner STAINLESS STEEL BRACKET WITH STAND
AS THIS FILTER SET HAS NANO ZINC AND SEDIMENT FILTER SET YOU WONT NEED UV STERILIZER OR SOFTER
20" X 4.5 Big Blue Triple Housing with Stand
Size: 63.3(W) x 80(H) x 21.8(D)
Weight: N.W. 20.98kg / G.W. 22.66kg
WATER FLOW 70 LITERS PER MINUTE SUIT FOR ALL WHOLE HOUSE SUITABLE FOR ANY FLOW 0-100LPM
OUTPUT SIZE 1" 25mm ALSO COMES WITH FREE 3/4 " REDUCING VALVE
PRODUCT IS FULLY ASSEMBLED
PP Sediment Supported with NANO-ZINC
- HIGH FLOW Polypropylene filter for removal of sand silt, Dirt and Rust particles, bacteria For water use only.
- Formed by thermal bond without use of any binders and adhesives.
- Maximum Temperature Range: 125°F (52°C)
- Dimensions: 20" x 4.5"
- Filters are individually wrapped
*Pressure drop will be determined based on feed water pressure, filter cartridge selection and port sizes, fluid viscosity, filter life and conditions.
This cartridge is capable of removing Algae, Dirt, Particles, Rust, Sand, Sediment and Silt so your water is debris-free and prepared for the next stage of this filtration process. Apart from removing the sediment from your water supply so you have cleaner water this filter is also the protection cartridge for the 2 x carbon block cartridges that follow, keeping them as clean as possible so they can work to their full potential removing chlorine.
They are made from high quality spun bonded polypropylene. These cartridges have a large holding capacity for a longer lifespan. Extremely important when the water board gives their system a flush and you get dirty water come down your water line without warning.
CTO Carbon Block Filter 5M WITH 70 LITERS PER MINUTE FAST FLOW
- HIGH FLOW Coconut Shell Activated Carbon Block Filter.
- Chlorine, taste , and odour sediment reduction.
- No release of carbon fines
- Material conforms FDA grade.
- This Filter Cartridge is Tested and Certified by NSF International against NSF/ANSI Standard 42 for material requirements only.
- Max. Pressure: 120 psi
- Max. Temperature: 104°F
- Suggested Life: 28000 gal
*Cautions: Flushing for 5 minutes prior to use.
*Warning: For water use only
These 2 stages provide maximum removal of chlorine from your water supply. Both these cartridges are for removing organic’s, chemicals and microorganisms. All our Filter cartridges are manufactured from the highest quality, raw materials with cutting-edge methods resulting in premium performance, reliability, absorption and flow rates. It is the volume of water and the chlorine content that will eventually dictate the lifespan of your cartridges but normally these cartridges are changed annually.
*Pressure drop will be determined based on feed water pressure, filter cartridge selection and port sizes, fluid viscosity, filter life and conditions.
Sediment Polyspun Filter 5 MICRON WITH 80 LITERS PER MINUTE WATER FLOW
- Three-layers structure cartridge, High contaminant holding capacity.
- 100% PP Polypropylene for compatibility with a wide range of process fluids.
- 5Micron, Micro-Denier™ melt-blown filtration fiber, high removal ratings. removes sediment, rust , algae removal
- Formed by thermal bond without use of any binders and adhesives.
- This Filter Cartridge is Tested and Certified by NSF International against NSF/ANSI Standard 42 for material requirements only.
- Maximum operating pressure: 125 PSI
- Operating Temperature Range: 125°F (52°C)
- Dimensions: 20" x 4.5"
- Filters are individually wrapped
*Pressure drop will be determined based on feed water pressure, filter cartridge selection and port sizes, fluid viscosity, filter life and conditions.
Sediment Polyspun Filter 5 MICRON WITH 80 LITERS PER MINUTE WATER FLOW
- Three-layers structure cartridge, High contaminant holding capacity.
- 100% PP Polypropylene for compatibility with a wide range of process fluids.
- 5Micron, Micro-Denier™ melt-blown filtration fiber, high removal ratings. removes sediment, rust , algae removal
- Formed by thermal bond without use of any binders and adhesives.
- This Filter Cartridge is Tested and Certified by NSF International against NSF/ANSI Standard 42 for material requirements only.
- Maximum operating pressure: 125 PSI
- Operating Temperature Range: 125°F (52°C)
- Dimensions: 20" x 4.5"
- Filters are individually wrapped
*Pressure drop will be determined based on feed water pressure, filter cartridge selection and port sizes, fluid viscosity, filter life and conditions.
IT002530- water mark certification
https://watermark.abcb.gov.au/product-search/product/138100