OMNIPURE Q5586 Filter

The Omnipure Q5586 2.5" x 10" T28 GAC & Phosphate Inline Cartridge is a granulated activated carbon filter that removes chlorine to improve both taste and odor. The Q5586 2.5" x 10" filter cartridge is for use with Q-Series heads. The Q5586 has a flow rate of 0.5 gpm and should be replaced every 6 months/1500 gallons.Great for use with ice makers, refrigerators, RO systems, and beverage systems.

Omnipure Q5586 Scale reduction 5 micron Phosphate and GAC screw-in replacement water filter.

Ideal for water supplies with some sediment, Coconut GAC rated at 5 microns.

Removes Sediment, Chlorine, Chemicals, Bad Taste and Odour and scale reduction.

Service life 12 months or 2000 Gal depending on water quality.

Suits Omnipure quick change heads and some other branded heads with a screw in thread.

Dimensions are 265mm long x 65mm wide 58mm across the thread.

These filters have an endless shelf life if unused, so buy in bulk and save.

REDUCES

Filter to effectively reduce the sediment, chlorine, taste & odours.

99.30% of Lead at pH 6.5
99.90% of Lead at pH 8.5
94.50% of Mercury at pH 6.5
96.60% of Mercury at pH 8.5
97.60% of Partculates (Class 1)
89.60% of Benzene
99.90% of P-Dichlorobenzene
99.99% of Cysts
98.70% of Carbofuran
97.00% of Chlorine
99.10% of Turbidity

Reduces the following contaminants:

2,4-Dichlorophenoxyacetic Acid (2,4-D)

Asbestos/ Atrazine/ Benzene/ Carbofuran/ Chlorine Taste & Odor/ Toxaphene

Lead at pH 6.5/ Lead at pH 8.5/ Lindane/ Mercury at pH 6.5/ Mercury at pH 8.5

Particulates (Class I)

Toxaphene

Chemical and Mechanical ReductionTested and Certified by NSF International against NSF/ANSI Standards 42 for the reduction of Chlorine Taste and Odour. Toxaphene

Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily in your water.