Billi 994004 Replacement Water Filter for High Sediment Areas

Billi 994004

New product

Billi 994004 Replacement Water Filter for High Sediment Areas

994004 HSD Replacement Filter for the Billi 911014 Filter Unit

More details

$179 tax incl.

More info

Billi.jpg

Billi 994004 HSD Replacement Filter for the Billi 911014 Filter Unit

The Billi 994004 replacement water filter cartridge will Remove/Reduce Dirt, Rust, Sediment Particles, Chemicals, Chlorine.

Triple Action Filter with Scale Inhibitor to help stop scale build up and protect elements and boilers.

The 994004 filter now replaces many of the older Billi swing change filters including the twin filter sets.

Replaces single filters 994001, 990402, 994002, 990356, 990413, 990415

Replaces twin filter sets 990412 and 990414 by using a 994004 in the left-hand side and a reusable filter by-pass insert 854100 in the right hand side, as the new 4 stage filter does the job of the old twin filter set.

The 994001 filters suits the following systems, Eco, Quadra, Eco and Quadra Sparkling, Sahara, Plus systems and the Alpine 125

Cartridge recommended service life 12 months

Dimensions 270mm over all x 83mm

SPECIFICATIONS

  • Filtration Capability: Sediment, Taste, Odour

  • Flow Rate: 3.8 Lpm

  • Water Pressure: 120 kPa min - 1,000 kPa max

  • Capacity: 20,000 litres

  • Water Temperature: 40°C Must not freeze

  • Billi recommends you change your filter at least every 12 months. If the unit is switched off for more than 48 hours, flush for 2 minutes.

REDUCES

Filter to effectively reduce the sediment, chlorine, taste & odours.

  • 99.30% of Lead at pH 6.5

  • 99.90% of Lead at pH 8.5

  • 94.50% of Mercury at pH 6.5

  • 96.60% of Mercury at pH 8.5

  • 97.60% of Partculates (Class 1) 

  • 89.60% of Benzene

  • 99.90% of P-Dichlorobenzene

  • 99.99% of Cysts

  • 98.70% of Carbofuran

  • 97.00% of Chlorine

  • 99.10% of Turbidity

Reduces the following contaminants:

2,4-Dichlorophenoxyacetic Acid (2,4-D)

Asbestos/ Atrazine/ Benzene/ Carbofuran/ Chlorine Taste & Odor/ Toxaphene

Lead at pH 6.5/ Lead at pH 8.5/ Lindane/ Mercury at pH 6.5/ Mercury at pH 8.5

Particulates (Class I)

Toxaphene

Chemical and Mechanical ReductionTested and Certified by NSF International against NSF/ANSI Standards 42 for the reduction of Chlorine Taste and Odour. Toxaphene

Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily in your water.

GUARANTEE

BEST PRICE GUARANTEE

We aim to provide you with the best price available in Australia!

If you are not 100% satisfied with your purchase we offer a full refund or replacement.

MORE INQUIRY?

Path: > > > Billi 994004 Replacement Water Filter for High Sediment Areas

Related Products