Billi 994001 Replacement Water Filter / Genuine Part

Billi 994001

New product

Billi 5 Micron Replacement Water Filter 994001

More details

$179 tax incl.

More info


Swing Change 5 micron replacement filter set.

New 4 stage Fibredyne™ technology.

The Billi water filter cartidge 994001 will Remove/Reduce Dirt, Rust, Sediment Particles, Chemicals, Chlorine.

5 Micron Triple Action Filter with Scale Inhibitor to help stop scale build up and protect elements and boilers.

The Billi water filter cartidge 994001 filter now replaces many of the older Billi swing change filters including the twin filter sets.

Replaces single filters   990402, 994002, 990356, 990413, 990415

Replaces twin filter sets 990412 and 990414 by using the Billi water filter cartidge 994001 in the left-hand side and a reusable filter by-pass insert 854100 in the right hand side, as the new 4 stage filter does the job of the old twin filter set.

The Billi water filter cartidge 994001 filters suits the following systems Eco, Quadra, Eco and Quadra Sparkling, Sahara, Plus systems and the Alpine 125

Cartridge recommended service life 12 months

Dimensions 270mm over all x 83mm

Billi water filter cartidge 994001 5 micron

Suit Billi Quadra and Quadra Plus


Replacement Filter for the followin billi models:

- Quadra 420
- Quadra 440
- Quadra 460
- Quadra 4100
- Quadra Plus 5
- Quadra Plus 9
- Quadra Plus 15

Swing Change 5 micron replacement filter set. New 4 stage Fibredyne technology.


5 Micron Rating - Sediment, Dirt, Rust, chlorine, taste and odour removal


Model # Billi water filter cartidge 994001


994001 Operating Specification:
 Nominal Filter Rating
│ 5 microns
 Filtration Capacity│ Sediment, Tater & Odour
 Flow Rate│ 3.8 Lpm
 Water Pressure│ 120 kPa min - 1000 kPa max
 Capacity│ 30,000 liters
 Water Temperature│ 40°C; Must not freeze
*Notice│ Billi recommends you change your filter at least every 12 months. If the unit is switched off for more than 48 hours, flush for 2 minutes.


Filter to effectively reduce the sediment, chlorine, taste & odours.

  • 99.30% of Lead at pH 6.5

  • 99.90% of Lead at pH 8.5

  • 94.50% of Mercury at pH 6.5

  • 96.60% of Mercury at pH 8.5

  • 97.60% of Partculates (Class 1) 

  • 89.60% of Benzene

  • 99.90% of P-Dichlorobenzene

  • 99.99% of Cysts

  • 98.70% of Carbofuran

  • 97.00% of Chlorine

  • 99.10% of Turbidity

Reduces the following contaminants:

2,4-Dichlorophenoxyacetic Acid (2,4-D)

Asbestos/ Atrazine/ Benzene/ Carbofuran/ Chlorine Taste & Odor/ Toxaphene

Lead at pH 6.5/ Lead at pH 8.5/ Lindane/ Mercury at pH 6.5/ Mercury at pH 8.5

Particulates (Class I)


Chemical and Mechanical ReductionTested and Certified by NSF International against NSF/ANSI Standards 42 for the reduction of Chlorine Taste and Odour. Toxaphene

Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily in your water.



We aim to provide you with the best price available in Australia!

If you are not 100% satisfied with your purchase we offer a full refund or replacement.


Path: > > > Billi 994001 Replacement Water Filter / Genuine Part

Related Products