Fisher and Paykel 847201 Internal Fridge Filter for RF523GDUX1 RF523MLDUX1 RF523MRDUX1 and other models
COMPATIBLE FILTERS & FRIDGES
1. Find the filter cover on the back wall, top right of your refrigerator. 2. Pull the tab at the bottom of the cover towards you to release. 3. Hold the base of the filter firmly and pull towards you. 4. Rotate the filter counterclockwise 90C. The filter should release from the filter head; if it does not, pull the filter towards you. 5. Pull out the filter to remove it from the filter head. Discard the old filter. 6. Remove the packaging from the new filter and align the new filter into the filter head. 7. Insert the filter into the filter head and push firmly all the way into the filter head and rotate clockwise 90C until it locks into place. 8. Push the entire filter back into the bracket and push the cover up and into the slots at the top of the filter housing until it locks into place.
Please note: It is not necessary to shut off the water supply when installing this water filter.
Flow Rate: 0.5 gpm / 1.89 Lpm
Capacity: 170 Gallons / 643 Litres
Operating Temperature: 0.6°C - 38°C
Operating Pressure: 120psi / 827kPa max.
Filter Life: 6 Months or when the Change Filter light comes on.
Certified NSF/ANSI Standards 43
Filter to effectively reduce the sediment, chlorine, taste & odours.
Lead at pH 6.5/ Lead at pH 8.5/ Lindane/ Mercury at pH 6.5/ Mercury at pH 8.5
Particulates (Class I)
Chemical and Mechanical ReductionTested and Certified by NSF International against NSF/ANSI Standards 42 for the reduction of Chlorine Taste and Odour.
Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily in your water.
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia!
If you are not 100% satisfied with your purchase we offer a full refund or replacement.