AQUA PURE PLUS
  • FREE SHIPPING ON ALL ITEMS!  AUSTRALIA WIDE!

Aqua-Pure Twin Whole House Water Filter System AP212

AP212

New product

The AP212 water filter system reduces
sediment, dirt, rust and improves taste & odour for the whole house.

The AP212 compliments and assists other filtration systems used for cyst protection.

More details

$899 tax incl.

More info

AQUA%20PURE-LOGO.jpg

Aqua-Pure Twin Whole House Water Filter System AP212

drinking water filter systems for great tasting water & cyst protection

Features-&-benefits_des.png

features
The AP212 whole house filter system is complete with dirt/rust and taste/odour cartridges, ready to use immediately

Unrestricted flow design and 3/4” connection provides a flow rate of up to 30 lpm with incoming pressure of 700kPa or greater

The AP212 is designed, fully assembled and tested in Australia

benefits
Provides clean, clear water throughout the whole house. A must for all new and existing homes

Reduces taste/odour, chlorine, allergens and organic matter. Improving the quality of water used for drinking, cooking, bathing and washing

Protects household plumbing and extends the life of faucets, hot water services and appliances by removing abrasive dirt, rust and sediment

Easy to install, complete with isolating valve

Three year warranty

The Aqua Pure AP212 is designed to be installed on the main water line after the garden tap, prior to entering the house.
The unit is designed for pipework to enter on the left hand side of the system.

(pipework may have to be modified to facilitate such fitting) The system is supplied with a complete set of filter cartridges.
Essential installation note: The AP212 is designed for use on microbiologically safe water only.

Allow a minimum of 50mm gap under the sump for cartridge replacement.

A certified dual check valve should be installed in conjunction with a 500kPa pressure limiting valve (not included), should the mains pressure exceed 900kPa (130psi).

Essential installation note: The AP212 is designed for use on microbiologically safe water only. Allow a minimum of 50mm gap under the sump for cartridge replacement. A certified dual check valve should be installed in conjunction with a 500kPa pressure limiting valve (not included), should the mains pressure exceed 900kPa (130psi).

Specification_des.png

Part no. 110465-00

Micron 5 (nominal)

Height 620mm

Width 350mm

Inlet connection size 3/4” BSPF

Outlet connection size 3/4” BSPM

Max. Flow Rate 30 lpm

Max. Pressure 900 kPa (130psi)

Max. Temperature 40℃.

REDUCES

Filter to effectively reduce the sediment, chlorine, taste & odours.

  • 99.30% of Lead at pH 6.5
  • 99.90% of Lead at pH 8.5
  • 94.50% of Mercury at pH 6.5
  • 96.60% of Mercury at pH 8.5
  • 97.60% of Partculates (Class 1) 
  • 89.60% of Benzene
  • 99.90% of P-Dichlorobenzene
  • 99.99% of Cysts
  • 98.70% of Carbofuran
  • 97.00% of Chlorine
  • 99.10% of Turbidity

Reduces the following contaminants:

2,4-Dichlorophenoxyacetic Acid (2,4-D)

Asbestos/ Atrazine/ Benzene/ Carbofuran/ Chlorine Taste & Odor/ Toxaphene

Lead at pH 6.5/ Lead at pH 8.5/ Lindane/ Mercury at pH 6.5/ Mercury at pH 8.5

Particulates (Class I)

Toxaphene

Chemical and Mechanical ReductionTested and Certified by NSF International against NSF/ANSI Standards 42 for the reduction of Chlorine Taste and Odour.

Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily in your water.

GUARANTEE

BEST PRICE GUARANTEE

We aim to provide you with the best price available in Australia!

IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.

MORE INQUIRY?

Path: > > > Aqua-Pure Twin Whole House Water Filter System AP212

Related Products