Billi 994004 HSD Replacement Filter for the Billi 911014 Filter Unit
The Billi 994004 replacement water filter cartridge will Remove/Reduce Dirt, Rust, Sediment Particles, Chemicals, Chlorine.
Triple Action Filter with Scale Inhibitor to help stop scale build up and protect elements and boilers.
The 994004 filter now replaces many of the older Billi swing change filters including the twin filter sets.
Replaces single filters 994001, 990402, 994002, 990356, 990413, 990415
Replaces twin filter sets 990412 and 990414 by using a 994004 in the left-hand side and a reusable filter by-pass insert 854100 in the right hand side, as the new 4 stage filter does the job of the old twin filter set.
The 994001 filters suits the following systems, Eco, Quadra, Eco and Quadra Sparkling, Sahara, Plus systems and the Alpine 125
Cartridge recommended service life 12 months
Dimensions 270mm over all x 83mm
Filtration Capability: Sediment, Taste, Odour
Flow Rate: 3.8 Lpm
Water Pressure: 120 kPa min - 1,000 kPa max
Capacity: 20,000 litres
Water Temperature: 40°C Must not freeze
Billi recommends you change your filter at least every 12 months. If the unit is switched off for more than 48 hours, flush for 2 minutes.
Filter to effectively reduce the sediment, chlorine, taste & odours.
Lead at pH 6.5/ Lead at pH 8.5/ Lindane/ Mercury at pH 6.5/ Mercury at pH 8.5
Particulates (Class I)
Chemical and Mechanical ReductionTested and Certified by NSF International against NSF/ANSI Standards 42 for the reduction of Chlorine Taste and Odour. Toxaphene
Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily in your water.
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia!
If you are not 100% satisfied with your purchase we offer a full refund or replacement.