Billi 994051 (994001) Fibron X 5-Micron Water Filter

• Filters Sediment, Chlorine, Taste & Odour

• 30,000 litres Capacity (Chlorine Reduction)

• Activated Carbon Media with minimal bonding agent to ensure high level chlorine & chemical adsorption

• Standard Premium Filtration for all environments

Replaces single filters   990402, 994002, 990356, 990413, 990415

Replaces twin filter sets 990412 and 990414 by using the Billi water filter cartidge 994001 in the left-hand side and a reusable filter by-pass insert 854100 in the right hand side, as the new 4 stage filter does the job of the old twin filter set.

The Billi water filter cartidge 994001 filters suits the following systems Eco, Quadra, Eco and Quadra Sparkling, Sahara, Plus systems and the Alpine 125

Replacement Filter for the follow in billi models:
Suits Billi Quadra Models: Quadra 420, Quadra 440, Quadra 460, Quadra 4100, Quadra 4180, Quadra Plus 5, Quadra Plus 9, Quadra Plus 15
Suits Billi Eco Boiling & Chilled as well as the Eco Boiling, Chilled & Sparkling
Suits Billi Sahara Models: Sahara 310, Sahara 320, Sahara 360, Sahara 3120
Suits Billi Alpine Models: Alpine 060, Alpine 120, Alpine 060 Sparkling, Alpine 120 Sparkling

Cartridge recommended service life 12 months
Dimensions 270mm over all x 83mm

How to Change your Filter Quadra Compact

Billi 994051(994001) Operating Specification:

• Nominal Filter Rating: 5 microns

• Filtration Capacity: Sediment, Tater & Odour

• Flow Rate: 3.8 Lpm

• Water Pressure: 120 kPa min - 1000 kPa max

• Capacity: 30,000 liters

• Water Temperature: 40°C; Must not freeze

• *Notice: Billi recommends you change your filter at least every 12 months. If the unit is switched off for more than 48 hours, flush for 2 minutes.

Filter to effectively reduce the sediment, chlorine, taste & odours.

• 99.30% of Lead at pH 6.5

• 99.90% of Lead at pH 8.5

• 94.50% of Mercury at pH 6.5

• 96.60% of Mercury at pH 8.5

• 97.60% of Partculates (Class 1) 

• 89.60% of Benzene

• 99.90% of P-Dichlorobenzene

• 99.99% of Cysts

• 98.70% of Carbofuran

• 97.00% of Chlorine

• 99.10% of Turbidity

Reduces the following contaminants:

2,4-Dichlorophenoxyacetic Acid (2,4-D)

Asbestos/ Atrazine/ Benzene/ Carbofuran/ Chlorine Taste & Odor/ Toxaphene

Lead at pH 6.5/ Lead at pH 8.5/ Lindane/ Mercury at pH 6.5/ Mercury at pH 8.5

Particulates (Class I)

Toxaphene

Chemical and Mechanical ReductionTested and Certified by NSF International against NSF/ANSI Standards 42 for the reduction of Chlorine Taste and Odour. Toxaphene

Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily in your water.

BEST PRICE GUARANTEE

We aim to provide you with the best price available in Australia!

If you are not 100% satisfied with your purchase we offer a full refund or replacement.

MORE INQUIRY?

• Call Us: 1300 767 072

• Email Us: sales@aquapureplus.com.au