3M™ Water Filtration Products High Flow Series Replacement Cartridge,

Model HF65-S, 1 per case, 5613409

3M™ Water Filtration Products Models HF65S single cartridge water filtration systems help provide consistent

high quality water for commercial coffee by reducing the effects of sediment,

chlorine taste/ odour and scale at flow rates up to 12.6 lpm.

Effectively reduces sediment and chlorine taste and odour for better equipment protection and clearer, great tasting coffee.

• NSF Standard 42 and/or FDA CFR-21 compliant materials.
• Built-in scale inhibitor reduces lime scale build-up on evaporator plates as tested 3M Purification.
• Sanitary Quick Change (SQC) encapsulated cartridge design allows for fast and easy cartridge change-outs with a 1/4 turn.
• 3/8” FNPT horizontal inlet and outlet ports allow direct or easily adaptable connections to existing plumbing lines. 

Model HF-S Series Best Features
• Filter cartridges are double o-ring seal type
• System maximum operating pressure of 125 psi (862 kPa) and operating temperature of 100°F (38°C)
• Filter cartridges incorporate carbon block media and scale inhibitor
• Cartridge body is constructed from high-impact glass-filled polypropylene
• Cartridges are sanitary in design, requiring no contact with the filter media during cartridge change-out
• Filter cartridges require no pre-activation 

About Carbon Filtration
In many filtration applications, carbon is often the preferred media of choice to absorb impurities and one of the most powerful absorbents available. Carbon is highly effective due to the vast surface area contained within a small footprint. One pound of carbon contains a surface area of approximately 100 to 125 acres and can absorb an extremely wide range of chemicals. As effective as carbon is, activated carbon is even more effective. Activated carbon is carbon that has been electro-positively charged to create adsorption. Adsorption is the adhesion of atoms, ions, or molecules from a gas, liquid, or dissolved solid to a surface. This process differs from absorption, where the fluid (absorbate) permeates or is dissolved and held within the filter media. When adsorption is in play, the water, or other fluid to be filtered, passes over the positively charged carbon surface. The negatively charged ions of the contaminants are attracted and held to the surface of the activated carbon particles and effectively removed.

Filters that employ activated carbon are rated by the size of the particles they can remove, as measured in microns. This nominal micron rating can range from 50 microns down to as small as 0.5, more than adequate to remove sediment, chlorine taste and odor, and most common bacteria from pre-filtered water.

Activated carbon filters used for home water treatment typically contain either granular activated carbon (GAC) or powdered block carbon. Both substances are effective, however, carbon block filters are more effective at removing a wider range of contaminants because of the greater surface area of carbon. Common sources for carbon used in water filtration include bituminous, wood, and carbon derived from coconut shells.

Greater Filtration with I.M.P.A.C.T.
Integrated Membrane Pre-Activated Carbon Technology (“I.M.P.A.C.T.”) used in 3M Purification Inc. products combines a pharmaceutical-grade microporous membrane and a pre-activated carbon block in a single cartridge to dramatically reduce pressure drop and practically eliminate the need for pre-filtration. The integrated membrane provides superior sediment holding capabilities while reducing Cryptosporidium and Giardia cysts1 and over 99.99 percent of all water-borne bacteria.2 Pre-activation of the carbon media is not required.

*Surfaces that are in contact with water are FDA CFR-21 Compliant

1 NSF Standard 53
2 As tested with E.coli ATCC (11229)

• Coffee

SPECIFICATIONS